Color Knowledge

  • Haze Meter for Color, Haze and Transmittance Measurement

  • 1. These are new haze meter produced by CHNSpec Tech.
     ⬇⬇⬇Click the pictures for more details⬇⬇⬇

                        CS-720 Color and Haze Meter                                                           CS-700 Haze Meter
    Type CS-720 CS-700
    Light Source Haze/Transmittance：CIE-A,CIE-C,CIE-D65
    Chromaticity Value：A,C,D50,D55,D65,D75,F1~F10,             
    F11,F12,CMF,U30,DLF,NBF,TL83,TL84    		 CIE-A,CIE-C,CIE-D65
    Standards ASTM D1003/D1044,ISO13468/ISO14782
    CIE No.15,ISO 7724/1,ASTM E1164,
    DIN 5033 Teil7,JIS Z8722 Condition c standard    		 ASTM D1003/D1044;
    ISO13468/ISO14782;
    Parameters Color, haze and transmittance haze and transmittance

    2. Haze Meter Introduction
    Haze is the light deviated from the incident light which is greater than 2.5 ° compared to the total transmitted light.
    haze meter
    Transmittance is the total incident light compared to the total transmitted light.
    haze measurement

    Haze meter is designed for plastic, films, glass, LCD panel, touch screen other transparent and semi-transparent materials color, haze and transmittance measurement.
    ◆ Conform to ASTM and ISO standard.
    ◆ 3 kinds of light sources A,C and D65 for measurement.
    ◆ CS-720 is with powerful color measurement function, it provides all measurement indexes and light sources.
    ◆ Open measurement area, no limit on sample size. Vertical measurement is also available.
    ◆ 5.0 inches TFT display screen.
    ◆ Instrument is with haze and transmittance measurement software.

    3. Haze Meter Instrument Structure
    haze meter structure
    How to use the instrument?

    ◆ 0% calibration and 100% calibration
    Note: If we calibrate instrument under ISO standard, the compensate port should be open (the cover should be taken off). If it is under ASTM standard, compensate port should be covered.
    When 100% calibration is done, we will get incident light flux T1 and scattering light flux T3, and then save them to calculate haze and transmittance.

    ◆ ASTM Standard
    When transmittance is measured, sample will be put on measurement aperture, blade will cover the light trap for measurement, and then we will get transmittance light flux T2.
    When haze is measured, sample will be put on measurement aperture, blade will cover the light trap for measurement, we will get transmittance light flux T2. Then blade will come to the compensate port, after measure, we will get instrument and sample scattering light flux T4.

    ◆ISO Standard
    When transmittance is measured, sample will be put on compensate port, blade will cover the light trap, then measure, we will get incident light flux T1 to replace the 100% calibration value. And then put the sample on the measurement aperture, blade position will not change, after measure, we will get the transmittance light flux T2
     
    When haze is measured, sample will be put on measurement aperture, blade will cover the light trap, after measurement, we will get transmittance light flux T2. Then blade will come to the compensate port, after measure, we will get instrument and sample scattering light flux T4.

    4.Haze Meter Application Examples
    5.CHNSpec Haze Meter Advantages
    Name CHNSpec Haze Meter Other Brand
    Price Better user experience and half price Expensivre
    Software custom made service We can design haze meter software according
    to customer’s requirement    		 without
    Storage 20000 samples 5000 samples
    Light Source Haze/Transmittance：CIE-A、CIE-C、CIE-D65
    Geometry 0/d
    Spectral Response CIE Luminosity function y
    Measurement Range 0-100%
    Repeatibility ≤0.1
    If any inquiry for color haze and transmittance measurement, please contact us directly. Email:ivyzhang@colorspec.cn and tel +86 18768499725.
      下载附件

     

     

     

    

     

  • [Close] [Top] [Print] [Bookmarks]
Links：